Huawei Quidway S5600 Series Operation Manual page 590

Operation Manual – VRRP
Quidway S5600 Series Ethernet Switches-Release 1510
1.2.3 Configuring Backup Group-Related Parameters
Table 1-4 lists the operations to configure a switch in a backup group.
Table 1-4 Configure backup group-related parameters
Operation
Enter system view
Create a VLAN
Quit to system view
Enter
interface view
Configure
priority
backup group
Configure
preemptive
and delay period
for the
group
Configure
authentication type
and authentication
key
Configure
VRRP timer
Specify
interface
tracked
1.2.4 Configuring the Port Tracking Function
You can perform the following configuration to implement port tracking function for the
VRRP backup group.
Command
system-view
vlan vlan-id
quit
VLAN interface
valn-id
the
vrrp vrid
of the
priority priority
the
mode
vrrp vrid
preempt-mode
backup delay delay-value ]
the
vrrp authentication-mode
authentication-type
authentication-key
vrrp vrid
the
timer
adver-interval
the vrrp vrid
to be track vlan-interface vlan-id
[ reduced value-reduced ]
Huawei Technologies Proprietary
—
Required
By default, vlan 1 is the
default vlan.
—
Vlan-interface
—
Optional
virtual-router-id
By default, the priority of a
backup group is 100.
Optional
virtual-router-id
By default, a backup group
[ timer
operates in the preemptive
mode.
Optional
By default, a backup group
does not authenticate.
Optional
virtual-router-id
By default, the interval for the
advertise
master switch in a backup
group to send VRRP packets
is 1 second.
Optional
virtual-router-id
value-reduced:
which the priority is to be
reduced.
value is 10.
1-8
Chapter 1 VRRP Configuration
Description
Value
By default,
by
this