Voice Vlan Configuration Example - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Voice VLAN
Quidway S5600 Series Ethernet Switches-Release 1510
Table 1-5 Display configurations of a Voice VLAN
Operation
Display
information about
ports
Voice
configuration fails
Display the voice
VLAN
configuration
status
Display
currently valid OUI
addresses
Display the ports
operating
current
VLAN

1.4 Voice VLAN Configuration Example

1.4.1 Voice VLAN Configuration Example (Automatic Mode)
I. Network requirements
Create VLAN 2 and configure it as a voice VLAN.
Configure GigabitEthernet1/0/1 port as a Trunk port, with VLAN 6 as the default
port.
GigabitEthernet1/0/1 port can be added to/removed from the voice VLAN
automatically according to the type of the data stream that reaches the port.
II. Configuration procedure
# Create VLAN 2.
<Quidway> system-view
[Quidway] vlan 2
# Configure GigabitEthernet1/0/1 port to be a Trunk port, with VLAN 6 as the default
VLAN.
[Quidway] interface GigabitEthernet1/0/1
[Quidway-GigabitEthernet1/0/1] port link-type trunk
[Quidway-GigabitEthernet1/0/1] port trunk pvid vlan 6
# Enable the voice VLAN function for the port and configure the port to operate in
automatic mode.
the
on which
display voice vlan error-info
VLAN
display voice vlan status
the
display voice vlan oui
in the
display vlan vlan-id
voice
Huawei Technologies Proprietary
Chapter 1 Voice VLAN Configuration
Command
1-8
Description
You can execute
display command in any
view.
the