Huawei Quidway S5600 Series Operation Manual page 817

Operation Manual – SNMP and RMON
Quidway S5600 Series Ethernet Switches-Release 1510
Set the maximum size of
SNMP packets that the Agent
can send/receive
Set the device engine ID
Table 1-3 Configure SNMP basic functions (SNMP V3)
Enter system view
Enable SNMP Agent
Set system information
Create or update the view
information
Set an SNMP group
Operation
Operation
Huawei Technologies Proprietary
Command
snmp-agent packet
max-size byte-count
snmp-agent
local-engineid engineid
Command
system-view
snmp-agent
snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { { v1 | v2c |
v3 }* | all } }
snmp-agent mib-view
{ included | excluded }
view-name oid-tree
snmp-agent group v3
group-name
[ authentication
privacy ] [ read-view
read-view ] [ write-view
write-view ] [ notify-view
notify-view ] [ acl
acl-number ]
1-5
Chapter 1 SNMP Configuration
Description
Optional
By default, it is 1,500
bytes.
Optional
By default, the device
engine ID
"Enterprise Number +
device information".
Description
—
Required
By default, SNMP
Agent is disabled
You can enable
SNMP agent
executing
command or
configuration
command
snmp-agent
Optional
By default, the contact
information for system
maintenance is "R&D
Beijing, Huawei
Technologies
Ltd.", the system
location is "Hangzhou
China", and
SNMP version
SNMP V3.
Optional
By default, the view
name is ViewDefault
and OID is 1.
|
Required
is
by
this
any
of
Co.,
the
is