Huawei Quidway S5600 Series Operation Manual page 492

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
Table 8-4 Configure Anycast RP application
Enter system view
Enter MSDP view
Create an MSDP peer
connection
Configure the RP address
to be
messages
Note:
In Anycast RP application, C-BSR and C-RP must be configured on different devices or
ports.
8.3.4 Configuring an MSDP Mesh Group
Configure a mesh group name on all the peers that will become members of the MSDP
mesh group, so that the peers are fully connected with one another in the mesh group.
Table 8-5 Configure an MSDP mesh group
Enter system view
Enter MSDP view
Add an MSDP peer in a
mesh group
Operation
system-view
msdp
peer
connect-interface
interface-type
interface-number
originating-rp
carried in SA interface-type
interface-number
Operation
system-view
msdp
peer
mesh-group name
Huawei Technologies Proprietary
Command
peer-address
Command
peer-address
8-10
Chapter 8 MSDP Configuration
Description
—
—
Required
Required
By default, the
address in SA messages
is the RP address
configured by PIM.
Description
—
—
Required
This command must be
configured on all
peers, so you
configure this command
for multiple times.
RP
the
must