Huawei Quidway S5600 Series Operation Manual page 910

Operation Manual – FTP and TFTP
Quidway S5600 Series Ethernet Switches-Release 1510
The IP address of a VLAN interface on the switch is 1.1.1.1. The port through
which the switch connects with the PC belongs to the VLAN. The IP address of
the PC is 1.1.1.2.
The application named switch.bin is stored on the PC. Download it to the switch
through TFTP, and upload the configuration file named vrpcfg.cfg to the work directory
on the PC to backup the configuration file.
II. Network diagram
Switch Switch Switch
Figure 1-5 Network diagram for TFTP configurations
III. Configuration procedure
1) Start the TFTP server and configure the work directory on the PC.
2) Configure the switch.
# Log into the switch. (You can log into a switch through the Console port or by
Telneting to the switch. See section "Log into an Ethernet Switch" for detailed
information.)
<Quidway>
Caution:
If available space on the Flash memory of the switch is not enough to hold the file to
be uploaded, you need to delete files from the Flash memory to make room for the file.
# Enter system view
<Quidway> system-view
[Quidway]
# Configure the IP address of a VLAN interface on the switch to 1.1.1.1, and ensure
that the port through which the switch connects with the PC belongs to this VLAN.
(This example assumes that the port belongs to VLAN 1.)
[Quidway] interface Vlan-interface 1
Network Network
Huawei Technologies Proprietary
1-17
Chapter 1 FTP and TFTP Configuration
PC PC