Huawei Quidway S5600 Series Operation Manual page 895

Operation Manual – FTP and TFTP
Quidway S5600 Series Ethernet Switches-Release 1510
Device
PC
Caution:
The FTP-related functions require that the route between a FTP client and the FTP
server is reachable.
FTP client
A switch can operate as an FTP client, through which you can access files on FTP
servers. In this case, you need to establish a connection between your PC and the
switch through a terminal emulation program or Telnet and then execute the ftp
X.X.X.X command on your PC. X.X.X.X is the IP address of an FTP server.)
Table 1-2 describes the configurations needed when a switch operates as an FTP
client.
Table 1-2 Configurations needed when a switch operates as an FTP client
Device
Switch
FTP
server
1.1.2 FTP Configuration: A Switch Operating as an FTP Server
I. Prerequisites
A switch operates as an FTP server. A remote PC operates as an FTP client. The
network operates properly, as shown in Figure 1-1.
Configuration
Log into the switch
through an FTP client
application.
Configuration
Run the ftp command
to log into a remote
FTP server directly
Enable the FTP server
and configure the
corresponding
information including
user names,
passwords, and user
authorities
Huawei Technologies Proprietary
Chapter 1 FTP and TFTP Configuration
Default
— —
Default
To log into a remote FTP server and
operates files and directories on it,
—
you need to obtain a user name and
password first.
— —
1-2
Description
Description