Huawei Quidway S5600 Series Operation Manual page 908

Operation Manual – FTP and TFTP
Quidway S5600 Series Ethernet Switches-Release 1510
1.2.2 TFTP Configuration
I. Prerequisites
A switch operates as a TFTP client and a remote PC as the TFTP server. The network
operates properly, as shown in Figure 1-4.
II. Basic TFTP configurations
Table 1-10 Basic TFTP configurations
Operation
Download
through TFTP
Upload
through TFTP
Enter system view
Set the TFTP file
transmission mode
Specify the ACL
adopted when a
switch attempts to
connect a TFTP
server
III. Specifying the source interface and source IP address for a TFTP client
You can specify the source interface and source IP address for a switch acting as a
TFTP client, so that it connects with a remote TFTP server through the IP address of
the specified interface or the specified IP address.
Table 1-11 Specify the source interface and source IP address for a TFTP client
Specify
interface so that the TFTP
client uses it to connect
with a TFTP server for the
next time
Specify the source IP
address so that the TFTP
client uses it to connect
with a TFTP server for the
next time
a file
tftp
source-file [ dest-file ]
a file tftp
source-file [ dest-file ]
system-view
tftp { ascii | binary }
tftp-server acl acl-number
Operation
tftp
the source
source-interface
interface-type
interface-number
source-file [ dest-file ] | put
source-file-url [ dest-file ] }
tftp
ip-address { get source-file
[ dest-file ] | put source-file-url
[ dest-file ] }
Huawei Technologies Proprietary
Chapter 1 FTP and TFTP Configuration
Command
tftp-server get
tftp-server put
Command
tftp-server
{
tftp-server source-ip
1-15
Description
Optional
Optional
—
Optional
By default, the binary file
transmission mode
adopted.
Optional
Description
Optional
get
Optional
is