Displaying And Debugging Information Center Configuration - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Note:
To view debug information of specific modules, you need to set the information type
as debug in the info-center source command, and enable debugging on
corresponding modules with the debugging command as well.
To send information to remote SNMP workstation properly, related configurations
are required on both the switch and the SNMP workstation.
1.3 Displaying and Debugging Information Center
Configuration
After the above configurations, you can execute the display command in any view to
display the running status of the information center, and thus validate you
configurations. You can also execute the reset command in user view to clear the
information in the log buffer and trap buffer.
Table 1-13 Display and debug information center
Display information on
information channel
Display
status
center, the configuration
of information channels,
the format of time stamp
and
output in case of fabric
Display the status of log
buffer and the information
recorded in log buffer
Display
information recorded in
log buffer
Display the status of trap
buffer and the information
recorded in trap buffer
Clear
recorded in log buffer
Clear
recorded in trap buffer
Operation
display channel [ channel-number |
channel-name ]
the operation
of information
display info-center [ unit unit-id ]
the information
display logbuffer [ unit unit-id ]
[ level severity | size buffersize ]* [ |
{ begin | exclude | include }
regular-expression ]
the summary
display logbuffer summary [ level
severity ]
display trapbuffer [ unit unit-id ]
[ size buffersize ]
information
reset logbuffer [ unit unit-id ]
information
reset trapbuffer [ unit unit-id ]
Huawei Technologies Proprietary
Command
1-14
Chapter 1 Information Center
Description
The display
command can be
executed in any
view
The reset
command can be
executed in user
view