Huawei Quidway S5600 Series Operation Manual page 791

Operation Manual – Cluster
Quidway S5600 Series Ethernet Switches-Release 1510
II. Network diagram
VLAN 3 VLAN 3
Port e1/0/1) Port e1/0/1)
S3526E S3526E S3526E S3526E
Figure 1-4 Network diagram for the NM interface configuration
III. Configuration procedure
# Enter system view and configure VLAN 3 as the management VLAN.
<Quidway> system-view
[Quidway] management-vlan 3
# Add the GigabitEthernet 1/0/1 port into VLAN 3.
[Quidway] vlan 3
[Quidway-vlan3] port GigabitEthernet 1/0/1
[Quidway-vlan3] quit
# Set the IP address of Vlan-interface 3 to 192.168.5.30.
[Quidway] interface Vlan-interface 3
[Quidway-Vlan-interface3] ip address 192.168.5.30 255.255.255.0
[Quidway-Vlan-interface3] quit
# Add the GigabitEthernet 1/0/2 port into VLAN2.
[Quidway] vlan 2
[Quidway-vlan2] port GigabitEthernet 1/0/2
[Quidway-vlan2] quit
# Set the IP address of Vlan-interface2 to 192.168.4.22.
[Quidway] interface Vlan-interface 2
[Quidway-Vlan-interface2] ip address 192.168.4.22 255.255.255.0
[Quidway-Vlan-interface2] quit
# Configure Vlan-interface2 as the NM interface.
[Quidway] cluster
[Quidway-cluster] nm-interface Vlan-interface 2
S5600 S5600
(IP Address192.168.4.22 (IP Address192.168.4.22
Port GE1/0/2 Port GE1/0/2
S2403 S2403 S2403 S2403
Huawei Technologies Proprietary
1-20
Chapter 1 Cluster
FTP Sever FTP Sever FTP Sever FTP Sever
(IP Address 192.168.4.3 ) (IP Address 192.168.4.3 ) (IP Address 192.168.4.3 ) (IP Address 192.168.4.3 )