Huawei Quidway S5600 Series Operation Manual page 696

Operation Manual – ACL
Quidway S5600 Series Ethernet Switches-Release 1510
Parameter
source
{
sour-wildcard
any }
destination
{
dest-wildcard
any }
precedence
precedence
tos tos
dscp dscp
fragment
time-range
time-name
Note:
sour-wildcard/dest-wildcard is the complement of the wildcard mask of the
source/destination subnet mask. For example, you need to input 0.0.255.255 to specify
the subnet mask 255.255.0.0. The arguments can be set as 0 to represent the host IP
address.
To define DSCP priority, you can directly input a value ranging from 0 to 63, or input a
keyword listed in Table 1-5.
Type
Source
sour-addr
address
|
information
Destination
dest-addr
address
|
information
Packet
precedence
Packet
precedence
Packet
precedence
Fragment
information
Time range
information
Huawei Technologies Proprietary
Function
sour-addr sour-wildcard is
used to specify the source
address
Specifies the
expressed in dotted decimal
source address
notation. sour-wildcard can
information in
be 0, which represents a
the rule
host address.
any represents any source
address.
dest-addr dest-wildcard is
used
destination address of the
Specifies the
packet, expressed in dotted
destination
decimal
address
dest-wildcard
information in
which represents a host
the rule
address.
any
destination address.
Packet priority Value range: 0 to 7
ToS priority Value range: 0 to 15
DSCP priority Value range: 0 to 63
Specifies that
the rule is
effective for
—
non-initial
fragment
packets
Specifies the
time range in
—
which the rule is
active
1-8
Chapter 1 ACL Configuration
Description
of the packet,
to specify
notation.
can be
represents any
the
0,