Setting Traffic Statistics; Displaying And Debugging Qos Configuration - Huawei Quidway S5000 Series Operation Manual

Operation Manual - QoS/ACL
Quidway S5000 Series Ethernet Switches

2.2.9 Setting Traffic Statistics

Traffic statistics count packets of designated service traffic, that is, the packets match
the defined ACL among those forwarded. After traffic statistics configuration, you can
view the information with the display qos-interface traffic-statistic command.
The following commands are involved in configuring traffic statistics.
Please perform the following configurations in Ethernet port view.
Table 2-10 Setting traffic statistics
Operation
Set traffic statistics
Remove traffic statistics
Display traffic information
For more details about the commands, see the corresponding contents in the
Command Manual.

2.2.10 Displaying and Debugging QoS Configuration

You can use the display command in any view to view the QoS operation after all these
configurations, further to check configuration result. You can also clear the statistic
information using the reset command in Ethernet port view.
Table 2-11 Displaying and debugging QoS
Operation
Display all QoS settings
Display traffic mirroring
Display port mirroring
Display queue scheduling
Display QoS settings of
information of all ports
Display traffic limit
Display line rate
Display priority label
Display traffic redirection
Display traffic statistics
Clear statistic information
For more details about the commands, see the corresponding contents in the
Command Manual.
traffic-statistic inbound { ip-group { acl-number | acl-name } [ rule rule ] |
link-group { acl-number | acl-name } [ rule rule ] }*
undo traffic-statistic inbound { ip-group { acl-number | acl-name } [ rule rule ] |
link-group { acl-number | acl-name } [ rule rule ] }*
display qos-interface [ interface-name | interface-type interface-num ]
traffic-statistic
display qos-global all
display qos-interface [ interface-name | interface-type interface-num ] mirrored-to
display mirror
display queue-scheduler
display qos-interface [ interface-name | interface-type interface-num ] all
display qos-interface [ interface-name | interface-type interface-num ] traffic-limit
display qos-interface [ interface-name | interface-type interface-num ] line-rate
display qos-interface[ interface-name | interface-type interface-num ]
traffic-priority
display qos-interface [ interface-name | interface-type interface-num ]
traffic-redirect
display qos-interface [ interface-name | interface-type interface-num ]
traffic-statistic
reset traffic-statistic inbound { all | { ip-group { acl-number | acl-name } [ rule
rule ] | link-group { acl-number | acl-name } [ rule rule ] }* }
2-10
Chapter 2 QoS configuration
Command
Command