Configuring Traffic Statistics - Huawei Quidway S5600 Series Operation Manual

Operation Manual - QoS&QoS Profile
Quidway S5600 Series Ethernet Switches
weight of queue 2: 3
weight of queue 3: 4
weight of queue 4: 5
weight of queue 5: 9
weight of queue 6: 13
weight of queue 7: 15

1.11 Configuring Traffic Statistics

Refer to 1.1.12 Traffic-based Traffic Statistics for the introduction to traffic statistics.
1.11.1 Configuration Prerequisites
ACL rules used for traffic identifying are defined. Refer to the ACL module in the
book for defining ACL rules
The ports that needs this configuration are specified
1.11.2 Configuration Procedure of Traffic Statistics
Table 1-16 Configure traffic statistics
Operation
Enter system view
Enter Ethernet port
view
Use the ACL rules in
traffic identifying and
perform
statistics
packets matching with
the ACL rules.
Display
statistics.
Display all the QoS
settings of the port
acl-rule: Applied ACL rules which can be the combination of various ACL rules. The
way of combination is described in Table 1-9.
Command
system-view
interface
interface-type
interface-number
traffic traffic-statistic
on the inbound acl-rule
display
qos-interface
the traffic {
interface-number
unit-id
traffic-statistic
display
qos-interface
{
interface-number
unit-id } all
Huawei Technologies Proprietary
—
—
Required
interface-type
|
}
Optional
You can execute the display
command in any view
interface-type
|
1-23
Chapter 1 QoS Configuration
Description