Displaying Port Security Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Port Security & Port Binding
Quidway S5600 Series Ethernet Switches-Release 1510
Set
number of Security MAC
addresses allowed by
the port
Set the port mode to
autolearn
Add a Security MAC
address manually
Note that:
1) The port-security port-mode autolearn command cannot be configured with the
following features at the same time:
Static and black-hole MAC address
Voice VLAN feature
802.1x feature
port link aggregation
configuration of mirroring reflect port
2) The port-security max-mac-count count-value command cannot be configured
with the mac-address max-mac-count count.

1.3 Displaying Port Security Configuration

After the above-mentioned configuration, you can use the display command in any
view to view the port-security related information, so as to verify configuration result.
Table 1-4 Display port security configuration
Display information about
port security configuration
Display
about
address configuration
Operation
the maximum
port-security
max-mac-count
count-value
port-security port-mode
autolearn
mac-address
mac-address [ interface
interface-type
interface-number
vlan-id
Operation
the information
Security MAC
Huawei Technologies Proprietary
Chapter 1 Port Security Configuration
Command
security
] vlan
Command
display port-security
[ interface interface-list ]
display mac-address security
[ interface interface-type
interface-number ] [ vlan vlan-id ]
[ count ]
1-7
Description
Required
By default, the maximum
number of Security MAC
addresses is not limited
Required
Required
This command can be
configured either
system view or Ethernet
port view
Description
The display
command can be
executed in any
view.
in