Upgrading The Pse Processing Software Online - Huawei Quidway S5600 Series Operation Manual

Operation Manual – PoE & PoE Profile
Quidway S5600 Series Ethernet Switches-Release 1510
1.8 Configuring PoE Over-Temperature Protection on the
Switch
If this function is enabled, the switch disables the PoE feature on all ports when its
internal temperature exceeds 65
feature settings on all its ports when the temperature drops below 60
Table 1-7 Configure PoE over-temperature protection on the switch
Enter system view
Enable
over-temperature
protection feature on the
switch
Note:
When the internal temperature of the switch decreases to 65
0
60 C (140
When the internal temperature of the switch increases to 60
0
65 C (149

1.9 Upgrading the PSE Processing Software Online

The online upgrading of PSE processing software can update the processing software
or repair the software if it is damaged. After downloading the PSE processing software
to the Flash of the switch, you can perform the following configuration. Refer to "File
System Management" for how to download the PSE processing software.
Table 1-8 Upgrade PSE processing software online
Operation
Enter system view
Upgrade
processing
online
Operation
system-view
the PoE
poe
temperature-protection
enable
0
F) above, the switch still disables the PoE feature on all the ports.
0
F) above , the switch still enables the PoE feature on all the ports.
system-view
the PSE
poe update { refresh |
software
full } filename
Huawei Technologies Proprietary
0 0
C (149 F) for self-protection, and restores the PoE
Command
Command
1-6
Chapter 1 PoE Configuration
0 0
C (140 F).
Description
—
Required
By default, the PoE
over-temperature
protection feature is
enabled on the
switch
0 0
C (149 F) below , but
0 0
C (140 F) above, but
Description
—
Required