Console Port Login Configuration With Authentication Mode Being None - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510
2.4 Console Port Login Configuration with Authentication
Mode Being None
2.4.1 Configuration Procedure
Table 2-4 Console port login configuration with the authentication mode being none
Operation
Enter system view
Enter
interface view
Configure
authenticate users
Configure
the
Console
port
Configure the command
level available to users
logging into the user
interface
Make terminal services
available
Set the
number of lines the
screen can contain
system-view
AUX user
user-interface aux 0
not to authentication-mode
none
Set the
speed speed-value
baud rate
Set the
parity { even | mark |
check
none | odd | space }
mode
Set the
stopbits { 1 | 1.5 | 2 }
stop bits
Set the
databits { 7 | 8 }
data bits
user privilege level
level
shell
maximum
screen-length
screen-length
Huawei Technologies Proprietary
Chapter 2 Logging in through the Console Port
Command
—
—
Required
By default, users logging in
through the Console port are
not authenticated.
Optional
The default baud rate of an
AUX port (also the Console
port) is 9,600 bps.
Optional
By default, the check mode of a
Console port is set to none,
that is, no check bit.
Optional
The stop bits of a Console port
is 1.
Optional
The default data bits of a
Console port is 8.
Optional
By default, commands of level
3 are available to users logging
into the AUX user interface.
Optional
By default, terminal services
are
interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You can use the screen-length
0 command to disable the
function to display information
in pages.
2-6
Description
available in all user