Ntp Broadcast Mode Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – NTP
Quidway S5600 Series Ethernet Switches-Release 1510
Clock status: synchronized
Clock stratum: 2
Reference clock ID: 3.0.1.32
Nominal frequency: 250.0000 Hz
Actual frequency: 249.9992 Hz
Clock precision: 2^19
Clock offset: 0.66 ms
Root delay: 27.47 ms
Root dispersion: 208.39 ms
Peer dispersion: 9.63 ms
Reference time: 17:03:32.022 UTC Thu Sep 6 2001 (BF422AE4.05AEA86C)
The output information indicates that the S5600 series switch is synchronized to
Quidway3 and the stratum of its local clock is 2, one stratum higher than Quidway3.
# View the information about the NTP sessions of the S5600 series switch and you
can see that a connection is established between the S5600 series switch and
Quidway3.
[S5600] display ntp-service sessions
source
*************************************************************************
*
[2]3.0.1.32
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured

1.7.3 NTP Broadcast Mode Configuration

I. Network requirements
Quidway3 sets its local clock to be an NTP master clock, with the stratum being 2.
NTP packets are broadcast through VLAN interface 2.
Configure S5600-1 and S5600-2 to listen broadcast packets through their VLAN
interface 2.
Note:
This example assumes that Quidway3 is a switch that supports the local clock being
the master clock.
reference stra reach poll
127.127.1.0
Huawei Technologies Proprietary
1-17
Chapter 1 NTP Configuration
now offset
1 1 64 1 350.1
delay disper
15.1 0.0