Displaying Ospf Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
4.7.9 Configuring OSPF Network Management System (NMS)
Table 4-21 Configure OSPF MIB binding
Operation
Enter system view
Configure
binding
Enable OSPF Trap

4.8 Displaying OSPF Configuration

After the above configuration, you can use the display command in any view to display
and verify the OSPF configuration.
You can use the reset command in user view to reset the OSPF counter or connection.
Table 4-22 Display configuration
Display
about one or all OSPF
processes
Display OSPF statistics
system-view
OSPF MIB ospf
process-id
snmp-agent trap enable
ospf
[ ifauthfail | ifcfgerror |
ifrxbadpkt
ifstatechange
iftxretransmit
lsdbapproachoverflow |
lsdboverflow
maxagelsa
nbrstatechange
originatelsa | vifauthfail
|
virifrxbadpkt
virifstatechange
viriftxretransmit
virnbrstatechange ]*
Operation
brief information
Huawei Technologies Proprietary
Command
mib-binding
[ process-id
vifcfgerror
Command
display ospf
[ process-id ] brief
display ospf
[ process-id
cumulative
4-25
Chapter 4 OSPF Configuration
Description
—
Optional
By default, MIB is bound
to the first enabled OSPF
process. When multiple
OSPF processes
enabled, you
configure to which OSPF
process the MIB is bound.
]
|
Optional
|
|
You can configure OSPF
to send diversified SNMP
|
TRAP messages
|
specify a certain OSPF
|
process to send SNMP
TRAP messages
|
process ID.
|
|
|
Description
You can execute the
display command in any
view.
]
are
can
and
by