Displaying The Routing Table; Static Route Configuration Example - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510

2.3 Displaying the Routing Table

After the above configuration, use the display command in any view to display and
verify the static route configuration.
Table 2-2 Display the routing table
Display routing table summary
Display routing table details
Display the detailed information
of a specific route
Display the routes in a specified
address range
Display the routes discovered by
a specified protocol
Display
routing table information
Display the statistics of the
routing table

2.4 Static Route Configuration Example

I. Network requirements
As shown in Figure 2-1, the masks of all the IP addresses in the figure are
255.255.255.0. It is required that all the hosts/Layer 3 switches in the figure can
interconnect with each other by configuring static routes.
Operation
the tree-structured
Huawei Technologies Proprietary
Chapter 2 Static Route Configuration
Command
display
routing-table
display
routing-table
verbose
display
routing-table
ip-address [ mask ]
[ longer-match
[ verbose ]
display
routing-table
ip-address1 mask1
ip-address2 mask2
[ verbose ]
display
routing-table
protocol protocol
[ inactive | verbose ]
display
routing-table radix
display
routing-table
statistics
2-3
Description
ip
ip
ip
]
ip
You can execute the
display command in
any view.
ip
ip
ip