Huawei Quidway S5600 Series Operation Manual page 780

Operation Manual – Cluster
Quidway S5600 Series Ethernet Switches-Release 1510
1.2.5 Configuring NTDP-related Parameters
Table 1-6 Configure NTDP parameters
Operation
Enter system view
Configure
range
information within
which
collected
Configure the hop
delay to forward
topology-collection
request packets
Configure the port
delay to forward
topology collection
request packets
Configure
interval to collect
topology
information
Quit system view.
Start
information
collection
1.2.6 Enabling the Cluster Function
Table 1-7 Enable the cluster function
Operation
Enter system view
Enable the cluster
function globally
system-view
the
topology
ntdp hop hop-value
is to be
ntdp timer hop-delay time
ntdp timer port-delay time
the
ntdp
interval-in-minutes
Quit
topology
ntdp explore
system-view
cluster enable
Huawei Technologies Proprietary
Command
timer
Command
1-9
Chapter 1 Cluster
Description
—
Optional
By default, the hop range for
topology collection is 3 hops
Optional
By default, the delay of the
device is 200 ms
Optional
By default, the port delay is 20
ms
Optional
By default, the interval of
topology collection is 1 minute
—
Optional
Description
—
Optional
By default, the cluster function
is enabled