Creating An Isp Domain - Huawei Quidway S5600 Series Operation Manual

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510
1.3.1 Configuration Prerequisites
If you want to adopt remote AAA method, you must create a RADIUS or HWTACACS
scheme.
RADIUS scheme (radius-scheme): You can reference a configured RADIUS
scheme to implement AAA services. For the configuration of RADIUS scheme,
refer to section 1.4 "RADIUS Configuration".
HWTACACS scheme (hwtacacs-scheme): You can reference a configured
RADIUS scheme to implement AAA services. For the configuration of RADIUS
scheme, refer to section 1.5 "HWTACACS Configuration".

1.3.2 Creating an ISP Domain

Table 1-5 Create an ISP domain
Enter system view
Create an ISP domain and enter
its view, enter the view of an
existing
configure
domain
1.3.3 Configuring the Attributes of an ISP Domain
Table 1-6 Configure the attributes of an ISP domain
Enter system view
Create an ISP domain or
enter the view of an existing
ISP domain
Activate/deactivate the ISP
domain
Operation
ISP domain, or
the default ISP
Operation
Huawei Technologies Proprietary
Chapter 1 AAA & RADIUS & HWTACACS
Command
system-view
domain { isp-name
default { disable | enable
isp-name } }
Command
system-view
domain isp-name
state { active | block }
1-14
Configuration
Description
—
Required
|
The default ISP
domain is
"system".
Description
—
Required
Optional
By default, once an
ISP domain is
created, it is in the
active state and all
the users in this
domain are allowed
to access the
network.