Huawei Quidway S5600 Series Operation Manual page 427

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Enable IGMP Snooping
filter in system view
Enter Ethernet port view
Configure the multicast
filtering feature on the port
2.2.5 Configuring to Limit Number of Multicast Groups on a Port
With a limit imposed on the number of multicast groups on the switch port, users can no
longer have as many multicast groups as they want when demanding multicast group
programs. Thereby, the bandwidth on the port is controlled.
Table 2-9 Configure to limit number of multicast groups on a port
Operation
Enter system view
Enter Ethernet port view
Limit the
multicast groups on a port
2.2.6 Configuring IGMP Querier
In an IGMP-enabled network, a specific query multicast router or Layer 3 multicast
switch is responsible for sending IGMP query packets.
igmp-snooping
group-policy acl-number
[ vlan vlan-list ]
interface
interface-number
igmp-snooping
group-policy acl-number
[ vlan vlan-list ]
system-view
interface
interface-number
igmp-snooping
number of group-limit limit [ vlan
vlan-list
[ overflow-replace ] ]
Huawei Technologies Proprietary
2-9
Chapter 2 IGMP Snooping Configuration
Command
Optional
interface-type
-
Optional
Command
—
interface-type
—
Optional
The number of multicast
groups on a port is not
limited by default.
Description
You can configure the
ACL to filter the IP
addresses of
corresponding
multicast group.
By default, the
multicast filtering
feature is disabled.
You can configure the
ACL to filter the IP
addresses of
corresponding
multicast group.
By default, the
multicast filtering
feature is disabled.
Description