Huawei Quidway S5600 Series Operation Manual page 85

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510
5) When the login interface (as shown in Figure 5-4) appears, enter the user name
and the password configured in step 2 and click <Login> to bring up the main page
of the Web-based network management system.
Figure 5-4 The login page of the Web-based network management system
5.3 Web Server Shutdown/Startup
You can shut down or start up the Web server.
Table 5-2 Shut down/ start up Web server
Operation
Shut
Web server
Start
server
The Web server is started by default.
Note:
To improve security and avoid malicious attack to the unused SOCKETs, TCP 80 port
for HTTP service will be enabled or disabled after corresponding configurations.
If you use the undo ip http shutdown command to enable the Web Server, TCP 80
will be enabled; if you use the ip http shutdown command to disabled the Web Server,
TCP 80 will be disabled.
down the
ip http shutdown
the Web
undo ip http shutdown
Huawei Technologies Proprietary
Chapter 5 Logging in through Web-based
Command
5-4
Network Management System
Description
Required
Execute this command in
system view.
Required
Execute this command in
system view.