Huawei Quidway S5600 Series Operation Manual page 750

Operation Manual – Mirroring
Quidway S5600 Series Ethernet Switches-Release 1510
Reference ACLs for identifying
traffic flows and perform traffic
mirroring
match.
Display the parameter settings
of traffic mirroring
Display all QoS settings of a
port
acl-rule: applied ACL rules, which can be the combination of different types of ACL
rules. The following table describes the ACL combinations.
Table 1-4 Combined application of ACLs
Apply all rules in an IP type ACL (either a
basic or an advanced ACL) separately
Apply one rule in an IP type ACL separately
Apply all rules in a Layer 2 ACL separately
Apply one rule in a Layer 2 ACL separately
Apply one rule in a user-defined ACL
separately
Apply all rules in a user-defined ACL
separately
Apply one rule in an IP type ACL and one
rule in a Layer 2 ACL simultaneously
III. Configuration example
1) Network requirements:
GigabitEthernet 1/0/1 on the switch is connected to the 10.1.1.1/24 network
segment.
Mirror the packets from the 10.1.1.1/24 network segment to GigabitEthernet 1/0/4,
the destination port.
2) Configuration procedure:
<Quidway> system-view
[Quidway] acl number 2000
[Quidway-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255
Operation
for packets that
Combination mode
Huawei Technologies Proprietary
Chapter 1 Mirroring Configuration
Command
mirrored-to inbound
acl-rule
{ monitor-interface | cpu }
display qos-interface
{ interface-type
interface-number | unit-id }
mirrored-to
display qos-interface
{ interface-type
interface-number | unit-id }
all
ip-group acl-number
ip-group acl-number rule rule-id
link-group acl-number
link-group acl-number rule rule-id
user-group acl-number
user-group acl-number rule rule-id
ip-group acl-number rule rule-id
link-group acl-number rule rule-id
1-5
Description
Required
Optional
These commands
can be executed in
any view.
Form of acl-rule