Huawei Quidway S5600 Series Operation Manual page 903

Operation Manual – FTP and TFTP
Quidway S5600 Series Ethernet Switches-Release 1510
Terminate the current FTP
connection and quit to
user view
Terminate the current FTP
control
data connection
Display the on-line help on
a specified
concerning FTP
Enable verbose function
II. Specifying the source interface and source IP address for an FTP client
You can specify the source interface and source IP address for a switch acting as an
FTP client, so that it connects with a remote FTP server through the IP address of the
specified interface or the specified IP address.
Table 1-8 Specify the source interface and source IP address for an FTP client
Specify
interface so that the FTP
client uses it to connect
with an FTP server for the
next time
Specify the source IP
address so that the FTP
client uses it to connect
with an FTP server for the
next time
Enter system view
Specify
interface so that the FTP
client always uses it to
connect
server
Specify the source IP
address so that the FTP
client always uses it to
connect
server
Operation
quit
connection and bye
remotehelp
command
[ protocol-command ]
verbose
Operation
the source
ftp { cluster | remote-server }
source-interface
interface-type
interface-number
ftp { cluster | remote-server }
source-ip ip-address
system-view
the source
ftp
interface-type
with an FTP interface-number
ftp source-ip ip-address
with an FTP
Huawei Technologies Proprietary
Chapter 1 FTP and TFTP Configuration
Command
Command
source-interface
1-10
Description
Optional
Optional
Optional
Optional
The verbose function is
enabled by default.
Description
Optional
Optional
—
Optional
Optional