Displaying And Debugging Arp - Huawei Quidway S5600 Series Operation Manual

Operation Manual – ARP
Quidway S5600 Series Ethernet Switches-Release 1510
1.2.5 Configuring the Gratuitous ARP Packet Learning Function
Table 1-8 lists the operations to configure the gratuitous ARP packet learning function.
Table 1-8 Configure the gratuitous ARP packet learning function
Operation
Enter system view
Enable
gratuitous
packet
function
Note
In S5600 series switches, the gratuitous ARP packet sending function is always
enabled. There is no command to control it.

1.3 Displaying and Debugging ARP

After the above configuration, you can execute the display command in any view to
display the running of the ARP configuration, and to verify the effect of the
configuration.
You can execute the reset command in user view to clear ARP mapping entries.
Table 1-9 Display and debug ARP
Operation
Display
ARP
table entries
Display the ARP
mapping
related
specified string in a
specified way
Display
number
specified
mapping entries
Command
system-view
the
ARP gratuitous-arp-learning
learning enable
Command
specific
display arp
mapping
dynamic | ip-address ]
entries display arp [ dynamic |
to a static | ip-address ] | { begin
| include | exclude } text
the display
of the [ [ dynamic | static ] [ |
ARP { begin | include | exclude }
text ] | ip-address ]
Huawei Technologies Proprietary
—
Required
By default, the gratuitous ARP
packet learning function is
enabled.
These commands can be
[ static |
executed in any view.
arp count
1-8
Chapter 1 ARP Configuration
Description
Description