Habp Client Configuration; Displaying Habp - Huawei Quidway S5600 Series Operation Manual

Operation Manual – 802.1x
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Configure
current switch to
be an HABP server
Configure
interval
HABP
packets.

2.3 HABP Client Configuration

HABP clients reside on switches attached to HABP servers. After you enable HABP for
a switch, the switch operates as an HABP client by default. So you only need to enable
HABP on a switch to make it an HABP client.
Table 2-2 Configure an HABP client
Operation
Enter system view
Enable HABP

2.4 Displaying HABP

After performing the above configuration, you can display and verify your HABP-related
configuration by execute the display command in any view.
Table 2-3 Display HABP
Display
configuration and status
information
Display the MAC address
table maintained by HABP
the
habp server vlan vlan-id
the
to send
habp timer interval
request
system-view
habp enable
Operation
HABP
display habp
display habp table
Huawei Technologies Proprietary
Command
Command
Command
2-2
Chapter 2 HABP Configuration
Description
Required
By default, a switch operates
as an HABP client after you
enable HABP on the switch,
and if you want to use the
switch as a management
switch, you must configure the
switch to be an HABP server.
Optional
The default interval for an
HABP server to send HABP
request packets
seconds.
Description
—
Optional
HABP is enabled by default.
And a switch operates as an
HABP client after you enable
HABP for it.
Description
You can execute the
display command in any
view
is 20