Remote Switch Update Configuration Example - Huawei Quidway S5600 Series Operation Manual

Operation Manual – System Maintenance and Debugging
Quidway S5600 Series Ethernet Switches-Release 1510
Table 4-7 Display the operating status of the device management
Display the APP to be
adopted at reboot
Display the module type
and operating status of
each board
Display CPU usage of a
switch
Display
status of the fan
Display memory usage of a
switch
Display
status of the power supply
Display system diagnostic
information or save system
diagnostic information to a
file suffixed with diag in the
Flash memory
Display enabled debugging
on a specified switch or all
switches in the fabric
Display enabled debugging
on all switches in the fabric
in terms of module names
Display
operating ambient

4.4 Remote Switch Update Configuration Example

I. Network requirements
Telnet to the switch from a PC remotely and download applications from the FTP server
to the Flash memory of the switch to remotely update the switch software by using the
device management commands through CLI.
The switch acts as the FTP client, and the remote PC serves as both the configuration
PC and the FTP server.
Perform the following configuration on the FTP server.
Operation
the operating
the operating
the switch
Huawei Technologies Proprietary
Command
display boot-loader
[ unit unit-id ]
display device
[ manuinfo [ unit unit-id ]
| unit unit-id ]
display cpu [ unit
unit-id ]
display fan [ unit unit-id
[ fan-id ] ]
display memory [ unit
unit-id | limit ]
display power [ unit
unit-id [ power-id ] ]
display
diagnostic-information
display debugging
[ fabric | unit unit-id ]
[ interface interface-type
interface-number
[ module-name ]
display debugging
fabric by-module
display environment
4-4
Chapter 4 Device Management
Description
You can execute the
display command in any
view.
]
You can execute the
display environment
command in user view.