Displaying The System Status; System Debugging - Huawei Quidway S5600 Series Operation Manual

Operation Manual – System Maintenance and Debugging
Quidway S5600 Series Ethernet Switches-Release 1510

2.2 Displaying the System Status

You can use the following display commands to check the status and configuration
information about the system. For information about protocols and ports, and the
associated display commands, refer to relevant sections.
Table 2-10 System display commands
Operation
Display the current
date and time of the
system
Display the version
of the system
Display
information
user
interfaces
Display
debugging status

2.3 System Debugging

2.3.1 Enabling/Disabling System Debugging
The Ethernet switch provides a variety of debugging functions. Most of the protocols
and features supported by the Ethernet switch are provided with corresponding
debugging functions. These debugging functions are a great help for you to diagnose
and troubleshoot your switch system.
The output of debugging information is controlled by two kinds of switches:
Protocol debugging, which controls whether the debugging information of a
protocol is output.
Terminal display, which controls whether the debugging information is output to a
user screen.
The relation between the two switches is as follows:
display clock
display version
the
about
display users [ all ]
terminal
display debugging [ fabric | unit
the
unit-id ] [ interface interface-type
interface-number ] [ module-name ]
Huawei Technologies Proprietary
Chapter 2 Basic System Configuration &
Command
2-4
Debugging
Description
You can execute the
display command in
any view