Management Device Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Cluster
Quidway S5600 Series Ethernet Switches-Release 1510

1.2 Management Device Configuration

1.2.1 Management Device Configuration Tasks
Table 1-2 Management device configuration tasks
Operation
Enable
globally
specific ports
Configure
NDP-related
parameters
Enable
globally
specific ports
Configure
NTDP-related
parameters
Enable the cluster
function
Configure
parameters
Configure
interaction for the
cluster
Configure
interface for the
cluster
1.2.2 Enabling NDP Globally and for Specific Ports
Table 1-3 Enable NDP globally and for a specific port
Enter system view
Enable NDP globally
Enable
NDP for
NDP
and for Required
Required
NTDP
and for Required
Required
Required
cluster
Required
Required
NM
Optional
Operation
system-view
ndp enable
In system ndp
view port-list
Huawei Technologies Proprietary
Description
Command
enable interface
1-7
Chapter 1 Cluster
Related section
Section 1.2.2 Enabling NDP
Globally and for Specific Ports
Section 1.2.3 Configuring
NDP-related Parameters
Section 1.2.4 Enabling NTDP
Globally and for Specific Ports
Section 1.2.5 Configuring
NTDP-related Parameters
Section 1.2.6 Enabling the
Cluster Function
Section 1.2.7 Configuring
Cluster Parameters
Section 1.2.8 Configuring
Interaction for the Cluster
Section 1.2.9 Configuring NM
Interface for the Cluster
Description
—
Required
By default, NDP is enabled
globally
You must choose one of
them