Huawei Quidway S5600 Series Operation Manual page 559

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Set the status of
the
RADIUS
authentication/aut
horization server
Set the status of
the
RADIUS
accounting server
Set the status of
the
RADIUS
authentication/aut
horization server
Set the status of
the
RADIUS
accounting server
1.4.8 Configuring the Attributes for Data to be Sent to RADIUS Servers
Table 1-19 Configure the attributes for data to be sent to the RADIUS servers
Operation
Enter
view
Create
RADIUS
scheme
enter its view
Set the format
of the
names to be
sent
RADIUS
servers
Set the units of
measure
data flows sent
to RADIUS
servers
Set the source
IP address
primary
state
{ block | active }
primary state primary accounting { block |
active }
secondary
state secondary authentication
{ block | active }
secondary state
{ block | active }
Command
system
system-view
a
radius
and radius-scheme-name
user
user-name-format
{ with-domain
to
without-domain }
data-flow-format data { byte |
for giga-byte
mega-byte
{ giga-packet | kilo-packet |
mega- packet | one-packet }
RADIUS scheme view
nas-ip ip-address
Huawei Technologies Proprietary
Chapter 1 AAA & RADIUS & HWTACACS
Command
primary authentication
secondary accounting
—
Required
scheme
By default, a RADIUS scheme
named "system" has already
been created in the system.
Optional
By default, the user names
|
sent
RADIUS servers carry ISP
domain names.
Optional
| kilo-byte |
By default, in a RADIIUS
} packet
scheme, the unit of measure
for data is byte and that for
packets is one-packet.
Optional
By default, no source IP
1-29
Configuration
Description
Optional
By default, all the
RADIUS servers in a
customized RADIUS
scheme are in the
block state; and the
primary RADIUS
servers in the default
RADIUS scheme
"system" are in the
active state, while the
secondary servers are
in the block state.
Description
from the switch to