Huawei Quidway S5600 Series Operation Manual page 95

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Quit to
view
Apply
while
the
community name
Apply
while
the SNMP group
name
Apply
while
the SNMP
name
Note:
You can specify different ACLs while configuring the SNMP community name, the
SNMP group name and the SNMP user name.
As SNMP community name is a feature of SNMP v1 and SNMP v2c, the specified ACLs
in the command that configures SNMP community names (the snmp-agent
community command) take effect in the network management systems that adopt
SNMP v1 and SNMP v2c.
Similarly, as SNMP group name and SNMP user name are features of SNMP v2c and
the higher SNMP versions, the specified ACLs in the commands that configure SNMP
system
quit
snmp-agent
the ACL
{ read
configuring
community-name
SNMP
[ [ mib-view view-name ] |
[ acl acl-number ] ]*
snmp-agent group { v1 |
v2c
[ read-view
[ write-view write-view ]
[ notify-view notify-view ]
the ACL
[ acl acl-number ]
configuring
snmp-agent
group-name
[ authentication | privacy ]
[ read-view
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
snmp-agent group { v1 |
v2c
[ read-view
[ write-view write-view ]
[ notify-view notify-view ]
the ACL
[ acl acl-number ]
configuring
snmp-agent
user
group-name
[ authentication | privacy ]
[ read-view
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
Huawei Technologies Proprietary
Command
community
| write }
} group-name
read-view ]
group v3
read-view ]
} group-name
read-view ]
group v3
read-view ]
8-6
Chapter 8 User Control
Description
—
Optional
By default, SNMPv1 and
SNMPv2c use community
name to access.
Optional
By default, the authentication
mode and the encryption
mode are configured as none
for the group.
Optional