Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
Enter
view
Enable PIM-DM/PIM-SM
on the current interface
7.2.2 Configuring the interval of sending Hello packets
PIM-DM must be enabled on each interface. After the configuration, PIM-DM will send
PIM Hello packets periodically and process protocol packets that the PIM neighbors
send.
Table 7-3 Configure the interval of sending Hello packets
Enter system view
Enable
routing protocol
Enter
view
Enable PIM-DM/PIM-SM
on the current interface
Configure the interval of
sending Hello packets on
the interface
Caution:
When PIM-DM is enabled on an interface, PIM-SM cannot be enabled on the
interface any more, and vice versa.
When PIM-DM is enabled on an interface of the switch, only PIM-DM can be
enabled on the other interfaces of the switch, and vice versa.
Operation
VLAN
interface
interface Vlan-interface
interface-number
pim dm / pim sm
Operation
system-view
the
multicast
multicast
routing-enable
VLAN
interface
interface Vlan-interface
interface-number
pim dm / pim sm
pim timer hello seconds
Huawei Technologies Proprietary
Command
Command
7-11
Chapter 7 PIM Configuration
Description
—
Optional
Configure
the
protocol
type
on
interface
Description
—
Required
—
Required
Configure
the
protocol
type
on
interface
Required
The interval of sending
Hello
packets
is
seconds
PIM
the
PIM
the
30