Route Capacity Configuration; Setting The Lower Limit And The Safety Value Of The Switch Memory - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510

7.2 Route Capacity Configuration

Route capacity configuration includes:
Setting the lower limit and the safety value of switch memory,
Enabling/disabling the switch to recover the disconnected routing protocol
automatically.

7.2.1 Setting the Lower Limit and the Safety Value of the Switch Memory

Perform the following configuration in system view.
Table 7-1 Set the lower limit and the safety value of switch memory
Enter system view
Set the lower limit and the
safety
memory
Note:
The safety-value must be greater than the limit-value.
7.2.2 Enabling/Disabling Automatic Protocol Connection Recovery
Table 7-2 Enable automatic protocol recovery
Enter system view
Enable automatic protocol
recovery
Disable automatic protocol
connection recovery
Operation
value of switch
Operation
Huawei Technologies Proprietary
Chapter 7 Route Capacity Configuration
Command
system-view
memory { safety safety-value |
limit limit-value }*
Command
system-view
memory auto-establish
enable
memory auto-establish
disable
7-2
Description
—
Optional
By default, the
default values are
used.
Description
—
Optional
By default,
automatic protocol
connection
recovery is
enabled.
Optional
Perform this
configuration with
caution.