Huawei Quidway S5600 Series Operation Manual page 126

Operation Manual – IP Address and Performance Confiugration
Quidway S5600 Series Ethernet Switches-Release 1510
Configure timeout time for
the synwait timer in TCP
Configure timeout time for
the finwait timer in TCP
Configure
receive/send buffer size of
TCP
2.1.4 Configuring Direct-Connected Broadcast Packet Receiving and
Forwarding
Broadcast packets include full-net broadcast packets and direct-connected
broadcast packets. A direct-connected broadcast packet is a packet whose
destination IP address is the network broadcast address of a subnet, but source IP
address is not in the subnet segment.
You can use the following commands to set whether to receive or forward
direct-connected broadcast packets.
Table 2-2 Configure direct-connected broadcast packet receiving and forwarding
Operation
Enter system view
Enable
direct-connected
broadcast
receipt
Enter
interface view
Enable
direct-connected
broadcast
forwarding through
interface
Operation
tcp
time-value
tcp
time-value
the socket
tcp window window-size
Command
system-view
ip forward-broadcast
packet
VLAN interface
Vlan-interface vlan-id
ip forward-broadcast
packet
[ acl-number ]
Huawei Technologies Proprietary
Chapter 2 IP Performance Configuration
Command
timer syn-timeout
timer fin-timeout
-
Optional
By
prohibits
broadcast packet receipt
-
Optional
By
prohibits
broadcast packet forwarding
through interface
2-2
Description
Optional
By default, the
value of the
TCP synwait
timer is
seconds.
Optional
By default, the
value of the
TCP finwait
timer is 675
seconds.
Optional
By default, the
size of the
transmission
and receiving
buffers is 8 KB.
Description
default, the system
direct-connected
default, the system
direct-connected
75