Displaying Source Ip Address Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510
Note:
To perform the configurations listed in Table 7-1 and Table 7-2, make sure that:
The IP address specified is that of the local device.
The interface specified exists.

7.2 Displaying Source IP Address Configuration

Execute the display command in any view to display the operation state after the
above configurations. You can verify the configuration effect through the displayed
information.
Table 7-3 Display the source IP address configuration
Display the source IP address
configured for the Telnet client
Display the source IP address
configured for the Telnet server
Operation
Huawei Technologies Proprietary
7-2
Chapter 7 Configuring Source IP Address
Command
display telnet source-ip
display telnet-server source-ip
for Telnet Service Packets