Sftp Configuration Example - Huawei Quidway S5600 Series Operation Manual

Operation Manual - SSH Terminal Services
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Display
source
specified for the SFTP
Client.

1.2.4 SFTP Configuration Example

I. Network requirements
As shown in Figure 1-5,
An SSH connection is present between Switch A and Switch B.
Switch B serves as an SFTP server, with IP address 10.111.27.91.
Switch A serves as an SFTP client.
An SSH user name abc with password hello is created.
II. Network diagram
Switch B Switch B
SFTP Server SFTP Server
IP address ：10.111.27.91 IP address ：10.111.27.91
PC PC
Figure 1-5 Network diagram for SFTP configuration
III. Configuration procedure
1) Configure Switch B (SFTP server)
# Enable the SFTP server.
[Quidway] sftp server enable
# Specify SFTP service for SSH user abc.
[Quidway] ssh user abc service-type sftp
2) Configure Switch A (SFTP client)
# Establish a connection to the remote SFTP server and enter SFTP client view.
the current
IP address
display sftp source-ip
Huawei Technologies Proprietary
Chapter 1 SSH Terminal Services
Command
Switch A Switch A
SFTP Client SFTP Client
1-21
Description
Optional
This command
can be executed
in any view.