Configuring Qos Profile - Huawei Quidway S5600 Series Operation Manual

Operation Manual - QoS&QoS Profile
Quidway S5600 Series Ethernet Switches
The following table describes the QoS profile configurations:
Table 2-1 Configure QoS profile
Device
AAA
server
Switch

2.3 Configuring QoS Profile

Refer to 2.1 Introduction to QoS Profile for the introduction to QoS profile.
2.3.1 Configuration Prerequisites
ACL rules used for traffic identifying are defined. Refer to the ACL module in this
book for defining ACL rules
The global 802.1x authentication function is enabled and 802.1x authentication
function is enabled on the user access port
The type and number of actions in the QoS profile is specified
The application mode of the QoS profile on the port is specified
2.3.2 Configuration Procedure
Table 2-2 Configure QoS profile
Operation
Enter system view
Enter QoS profile view
Add TP actions
Add
actions
Configuration
Configure user
information
Configure the
relationship between
profile and the user name
Enable the 802.1x authentication
function
Configure QoS profile
Apply the QoS profile to a port
manually
system-view
qos-profile profile-name
traffic-limit
acl-rule
[ exceed action ]
packet filter packet-filter
acl-rule
Huawei Technologies Proprietary
Chapter 2 QoS Profile Configuration
authentication
—
matching
One QoS profile can match with
the QoS
more than one users
Refer to 802.1x module in this
manual
configuration procedure
2.3 Configuring QoS Profile
2.4 Applying the QoS Profile to
the Port Manually
Command
inbound
target-rate
inbound
2-2
Configuration link
for the
Description
—
—
Optional
Optional
related