Huawei Quidway S5600 Series Operation Manual page 545

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510
Set the maximum number of
access users that can be
contained in the ISP domain
Set the user idle-cut function
Open/close
accounting-optional switch
Set the messenger function
Set the self-service server
location function
Caution:
On an S5600 series switch, each access user belongs to an ISP domain. You can
configure up to 16 ISP domains on the switch. When a user logs in, if no ISP domain
name is carried in the user name, the switch assumes that the user belongs to the
default ISP domain.
When charging a user, if the system does not find any available accounting server
or fails to communicate with any accounting server, it will not disconnect the user as
long as the accounting optional command has been executed.
The
self-service-supported RADIUS server (such as CAMS). Through self-service,
users can manage and control their accounts or card numbers by themselves. A
server installed with the self-service software is called a self-service server.
Operation
the
self-service server
Huawei Technologies Proprietary
Chapter 1 AAA & RADIUS & HWTACACS
Command
access-limit { disable
enable max-user-number }
idle-cut { disable | enable
minute flow }
accounting optional
messenger time { enable
limit interval | disable }
self-service-url { disable |
enable url-string }
location function
1-15
Configuration
Description
Optional
After an
domain is created,
|
the number
access users it can
contain is unlimited
by default.
Optional
By default,
idle-cut function is
disabled.
Optional
By default, once an
ISP domain
created,
accounting-optiona
l switch is closed.
Optional
By default,
messenger
function
disabled.
Optional
By default,
self-service server
location function is
disabled.
must cooperate with
ISP
of
user
is
the
the
is
the
a