Basic Rip Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
Configuring RIP Route
Control
RIP
Adjustment
Optimization
Displaying and Maintaining RIP Configuration

3.3 Basic RIP Configuration

3.3.1 Configuration Prerequisites
Before configuring basic RIP functions, perform the following tasks:
Configuring the link layer protocol
Configuring the network layer addresses of interfaces so that adjacent nodes are
reachable to each other at the network layer
Configuration Task
Setting the
routing metrics
interface
Configuring
summary
Disabling the receiving of
host routes
Configuring RIP to filter or
advertise
routes
Setting RIP preference
Enabling
sharing
Configuring RIP to import
routes from
protocol
Configuring RIP timers
Configuring split horizon
Network
Configuring RIP-1 packet
and zero field check
Setting RIP-2
authentication mode
Configuring a RIP neighbor
Huawei Technologies Proprietary
3-3
Chapter 3 RIP Configuration
Description
additional
of an Optional
RIP route
Optional
Optional
the received Optional
Optional
RIP traffic
Optional
another Optional
Optional
Optional
Optional
packet
Optional
Optional
Optional
Referenc
e section
3.4.2 I.
3.4.2 II.
3.4.2 III.
3.4.2 IV.
3.4.2 V.
3.4.2 VI.
3.4.2 VII.
3.5.2 I.
3.5.2 II.
3.5.2 III.
3.5.2 IV.
3.5.2 V.
0