Huawei Quidway S5600 Series Operation Manual page 50

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Set the
number of lines the
screen can contain
Set history command
buffer size
Set the timeout time
for the user interface
Note that the level the commands of which are available to users logging into a switch
depends on both the authentication-mode password and the user privilege level
level command, as listed in the following table.
Table 2-7 Determine the command level (B)
Authentication
mode
Local authentication
(authentication-m
ode password)
Command
maximum
screen-length
screen-length
history-comman
d max-size value
idle-timeout
minutes
[ seconds ]
Scenario
User type
Users logging in
through
AUX
interface
Huawei Technologies Proprietary
2-10
Chapter 2 Logging in through the Console Port
Optional
By default, the screen can contain up
to 24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Optional
The default history command buffer
size is 10. That is, a history command
buffer can store up to 10 commands
by default.
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a user
interface is terminated if no operation
is performed in the user interface
within 10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.
Command
The user privilege level
level command is not
executed
the
user
The user privilege level
level command
already executed
Description
Command
level
Level 3
Determined
is by the level
argument