Poe Configuration Example - Huawei Quidway S5600 Series Operation Manual

Operation Manual – PoE & PoE Profile
Quidway S5600 Series Ethernet Switches-Release 1510

1.11 PoE Configuration Example

I. Networking requirements
The GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 ports of the S5624P-PWR
switch are connected to an S2016C switch and an AP respectively; the
GigabitEthernet 1/0/24 port is intended to be connected with an important AP.
The PSE processing software of the S5624P-PWR switch is first upgraded online.
The remotely accessed PDs are powered by the S5624P-PWR switch.
The maximum power consumption of the accessed AP is 2500 mW, and the
power consumption of the S2016C switch is 12000 mW.
It is required to guarantee the power feeding to the PDs connected to the
GigabitEthernet1/0/24 port even when the S5624P-PWR switch is under full load.
II. Networking diagram
S5624P-PWR S5624P-PWR
GE1/0/1 GE1/0/1
S2016C S2016C S2016C S2016C S2016C S2016C S2016C S2016C
Figure 1-1 Network diagram for PoE
III. Configuration procedure
# Upgrade the PSE processing software online.
<Quidway> system-view
[Quidway] poe update refresh 0290_021.s19
# Enable the PoE feature on GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and
GigabitEthernet 1/0/24.
[Quidway] interface GigabitEthernet 1/0/1
[Quidway-GigabitEthernet1/0/1] poe enable
[Quidway-GigabitEthernet1/0/1] quit
[Quidway] interface GigabitEthernet 1/0/2
[Quidway-GigabitEthernet1/0/2] poe enable
[Quidway-GigabitEthernet1/0/2] quit
[Quidway] interface GigabitEthernet 1/0/24
[Quidway-GigabitEthernet1/0/24] poe enable
[Quidway-GigabitEthernet1/0/24] quit
Network Network Network Network
GE1/0/24 GE1/0/24 GE1/0/24 GE1/0/24
GE1/0/2 GE1/0/2
AP AP AP AP AP AP AP AP AP AP AP AP AP AP AP AP
Huawei Technologies Proprietary
1-8
Chapter 1 PoE Configuration