Displaying And Debugging Irf Fabric; Irf Fabric Configuration Example - Huawei Quidway S5600 Series Operation Manual

Operation Manual – IRF Fabric
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Assign a fabric name to
the switch

1.4 Displaying and Debugging IRF Fabric

Following completion of the above configuration, you can execute the display
command in any view to view device management and verify the settings. And you
can execute the reset command to clear the FTM statistics.
Table 1-9 Display and debug FTM
Operation
Display the information
about an IRF fabric
Display
information of an IRF
fabric
Display RMON statistics
of a specified unit in an
IRF fabric
Display
data of a specified unit in
an IRF fabric
Clear the FTM statistics

1.5 IRF Fabric Configuration Example

1.5.1 Networking requirements
Configure unit ID, unit name, and IRF fabric name to enable them to form an IRF
fabric.
The configuration details are as follows:
Unit IDs: 1, 2, 3, 4
Unit names: unit 1, unit 2, unit 3, unit 4
Fabric name: hello
sysname sysname
display irf-fabric [ status ]
the topology
display ftm { information |
topology-database }
display
unit unit-id
RMON history
display rmon history unit
unit-id
reset ftm statistics
Huawei Technologies Proprietary
Chapter 1 IRF Fabric Configuration
Command
Command
rmon statistics
1-8
Description
Optional
By default, the IRF fabric
name is Quidway.
Description
These commands can
be executed in any
view.
Execute this command
in user view