Displaying And Debugging Centralized Mac Address Authentication - Huawei Quidway S5600 Series Operation Manual

Operation Manual -- Centralized MAC Address Authentication
Quidway S5600 Series Ethernet Switches-Release 1510
Offline detect timer, which sets the time interval for a switch to test whether a user
goes offline. Upon detecting a user is offline, a switch notifies the RADIUS server
of the user to trigger the RADIUS server to stop the accounting on the user.
Quiet timer, which sets the quiet period for a switch. After a user fails to pass the
authentication performed by a switch, the switch quiets for a specific period (the
quiet period) before it authenticates users again.
Server timeout timer. During authentication, the switch prohibits the user from
accessing the network through the corresponding port if the connection between
the switch and RADIUS server times out.
Table 1-7 lists the operations to configure the timers used in centralized MAC address
authentication.
Table 1-7 Configure the timers used in centralized MAC address authentication
Operation
Enter system view
Configure a timer
used in centralized
MAC
authentication
1.3 Displaying and Debugging Centralized MAC Address
Authentication
After the above configuration, you can execute the display command in any view to
display system running of centralized MAC address authentication configuration, and
to verify the effect of the configuration.
Table 1-8 Display and debug centralized MAC address authentication
Operation
Display global or
port
about
MAC
authentication
system-view
mac-authentication
{
offline-detect-value | quiet
address
quiet-value | server-timeout
server-timeout-value }
information display
centralized mac-authentication
address
[ interface interface-list ]
Huawei Technologies Proprietary
Chapter 1 Centralized MAC Address
Command
timer
offline-detect
Command
1-5
Authentication Configuration
Description
—
Optional
The default settings of the
timers used in centralized
MAC address authentication
are as follows:
Offline detect timer: 300
seconds
Quiet timer: 60 seconds
Server timeout timer: 100
seconds
Description
This command can
executed in any view.
be