Huawei Quidway S5600 Series Operation Manual page 17

Operation Manual – Overview
Quidway S5600 Series Ethernet Switches-Release 1510
Part
13 DLDP
14 MAC Address
Table
15 Auto Detect
16 MSTP
17
Protocols.
18 Multicast
19 802.1x
20
AAA&RADIUS&H
WTACACS&EAD
21 VRRP
22 Centralized
MAC
Authentication
23 ARP
24 DHCP
Device link detection protocol (DLDP)
Manually configuring dynamic, static, and black hole
MAC addresses
Configuring the aging time for MAC addresses
MAC address learning limit
Auto detect
Auto detect applications in static routing, VRRP, and
VLAN interface backup
STP/RSTP/MSTP
QinQ BPDU tunnel
Huawei-3Com-proprietary MSTP path cost standard
Static route
Routing information protocol (RIP) v1/v2
Routing
Open shortest path first (OSPF)
Border Gateway Protocol (BGP)
Routing policy
Internet group management protocol snooping (IGMP
Snooping)
Internet group management protocol (IGMP)
Protocol-independent multicast-dense mode (PIM-DM)
Protocol-independent multicast-sparse mode (PIM-SM)
802.1X authentication
Guest VLAN
Huawei authentication bypass protocol (HABP)
Authentication, authorization, and accounting (AAA)
Remote authentication dial-In user service (RADIUS)
Huawei terminal access controller access control system
(HWTACACS)
Endpoint admission defense (EAD)
Virtual router redundancy protocol (VRRP)
Address Centralized MAC address authentication
Gratuitous ARP
Manually configuring ARP entries
DHCP server
DHCP relay
DHCP Snooping
DHCP accounting
Using Option184 in DHCP server
Using Option82 in DHCP relay
Huawei Technologies Proprietary
Features
3-3
Chapter 3 Product Overview