Huawei Quidway S5600 Series Operation Manual page 197

Operation Manual – Port Security & Port Binding
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Set
corresponding
action
device
after the Intrusion
Protection feature
is enabled.
Configure not to
apply
authorization
information
delivered by the
server
current port
Return to system
view
Set the timer for
temporarily
disabling a port
Note:
The time set by the port-security timer disableport timer command is the same as
the time set for temporarily disabling a port while executing the port-security
intrusion-mode command under disableport-temporarily mode.
With the port security enabled, a device has the following restrictions on the 802.1x
authentication and MAC address authentication in order to prevent conflictions.
1) The access control mode (set by the dot1x port-control command) is
automatically set to auto.
2) The dot1x, dot1x port-method, dot1x port-control, and mac-authentication
commands are inapplicable.
the
port-security intrusion-mode
that the
{ disableport
will take
disableport-temporarily
blockmac }
the
port-security
ignore
on the
quit
port-security
disableport timer
Huawei Technologies Proprietary
Chapter 1 Port Security Configuration
Command
|
|
authorization
timer
1-5
Description
Required
No specific intrusion
detection mode
configured by default.
Optional
By default, the authorization
information delivered by the
server is applied on the
port.
-
Optional
Defaults to 20 seconds.
is