Operation Manual – SNMP and RMON
Quidway S3900 Series Ethernet Switches-Release 1510
1.4 Setting the Logging Function for Network Management
Table 1-5 Set the logging function for network management
Operation
Enter system view
Set
the
function for network
management
Note:
In the environment of a single device, use the display logbuffer command to view
the logging information for the get and set operations sent from NMS.
In the fabric environment, use the display logbuffer command on the master
device to view the logging information for the set operation. Use the display
logbuffer command on the device that has received the get message to view the
logging information for the get operation sent from NMS.
1.5 Displaying SNMP
After the above configuration is completed, execute the display command in any view
to view the running status of SNMP, and to verify the configuration.
Table 1-6 Display SNMP
Display system information of the
current SNMP device
Display
information
Display the engine ID of the current
device
Display group information about the
device
Display SNMP user information
Command
system-view
logging
snmp-agent
{
set-operation
get-operation | all }
Operation
SNMP
packet
statistics
Huawei Technologies Proprietary
Chapter 1 SNMP Configuration
—
Optional;
log
|
By
function for SNMP is disabled.
Command
display
snmp-agent
sys-info [ contact |
location | version ]*
display
snmp-agent
statistics
display
snmp-agent
{
local-engineid
remote-engineid }
display
snmp-agent
group [ group-name ]
display
snmp-agent
usm-user [ engineid
engineid
|
user-name
group-name ]
1-8
Description
default,
the
logging
Description
The display
command
can
executed in
any view
|
username
|
group
be