Outputting Information To The Telnet Terminal; Outputting Information To The Snmp Agent - Huawei S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
The terminal is enabled to display debugging information, log information, or trap information.
----End

2.4.3 Outputting Information to the Telnet Terminal

Context
Do as follows on the S9300 where information needs to be output to the Telnet terminal:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center monitor channel { channel-number | channel-name }
Information is output to the Telnet terminal.
Step 3 Run:
quit
Return to the user view.
Step 4 Run:
terminal monitor
The terminal is enabled to display information.
Step 5 Run:
terminal { debugging | logging | trapping }
The terminal is enabled to display debugging information, log information, or trap information.
----End

2.4.4 Outputting Information to the SNMP Agent

Context
Do as follows on the S9300 where information needs to be output to the SNMP agent:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center snmp channel { channel-number | channel-name }
Issue 02 (2009-08-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Information Center Configuration
2-13