Sending Information To The Snmp Agent; Sending Information To The Log Buffer; Sending Information To The Trap Buffer - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management

6.3.3 Sending Information to the SNMP Agent

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center snmp channel { channel-number | channel-name }
Information is sent to the SNMP agent.
Step 3 Run:
snmp-agent
The SNMP agent is enabled.
For details on configuring the SNMP agent, refer to chapter "SNMP Configuration" in the
Configuration Guide - Network Management.
----End

6.3.4 Sending Information to the Log Buffer

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center logbuffer [ channel { channel-number | channel-name } | size
buffersize ]
Information is sent to the log buffer.
----End

6.3.5 Sending Information to the Trap Buffer

Context
Do as follows on the S3700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Issue 01 (2011-07-15)
*
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Monitoring the Device Through the Information Center
59