Displaying Snmp - Huawei Quidway S3100 Series Operation Manual

Operation Manual – SNMP
Quidway S3100 Series Ethernet Switches
Set Trap target host
address
Set the source address
to send Trap packets
Set the
queue length of Trap
packet
destination host
Set aging time for Trap
packets

1.4 Displaying SNMP

After the above configuration is completed, execute the display command in any view
to view the running of SNMP, and to verify the configuration.
Table 1-5 Display SNMP
Display system information of the
current SNMP device
Display
information
Display the engine ID of the current
device
Display group information about the
device
Display SNMP user information
Display Trap list information
Display
community name
Display the currently configured MIB
view
Operation
snmp-agent
address udp-domain { ip-addr }
[ udp-port port-number ] params
securityname security-string [ v1 |
v2c | v3 {authentication | privacy } ]
snmp-agent
interface-type interface-number
information
snmp-agent trap queue-size size
sent to
snmp-agent trap life seconds
Operation
SNMP packet
the currently
Huawei Technologies Proprietary
Command
target-host
trap
display snmp-agent sys-info [ contact
| location | version ]*
statistics
display snmp-agent statistics
display snmp-agent { local-engineid |
remote-engineid }
display
[ group-name ]
display
[ engineid
user-name | group group-name ]
display snmp-agent trap-list
configured display
[ read | write ]
display
[ exclude | include | viewname
view-name ]
1-7
Chapter 1 SNMP Configuration
Description
trap
Required
source
Optional
Optional
The
value I s 100.
Optional
The
aging time for
Trap packets is
120 seconds.
Command
snmp-agent
snmp-agent usm-user
engineid | username
snmp-agent community
snmp-agent mib-view
default
default
group