Maintaining Arp Security; Displaying The Statistics About Arp Packets; Clearing The Statistics On Arp Packets - Huawei Quidway S9300 Configuration Manual

4 ARP Security Configuration
Others
------------------------------------------------------------------------
4 specified IP addresses are configured, spec is 1024 items.
ARP miss speed-limit for source-IP configuration:
IP-address
------------------------------------------------------------------------
10.0.0.1
10.0.0.2
10.0.0.8
2.1.1.10
Others
------------------------------------------------------------------------
4 specified IP addresses are configured, spec is 1024 items.

4.6 Maintaining ARP Security

This section describes how to maintain ARP security.

4.6.1 Displaying the Statistics About ARP Packets

4.6.2 Clearing the Statistics on ARP Packets

4.6.3 Clearing the Statistics on Discarded ARP Packets
4.6.4 Debugging ARP Packets
4.6.1 Displaying the Statistics About ARP Packets
Procedure
l
----End
Example
Run the display arp packet statistics command, and you can view the statistics on ARP packets.
<Quidway> display arp packet statistics
ARP Pkt Received:
ARP Learnt Count:
ARP Pkt Discard For Limit:
ARP Pkt Discard For SpeedLimit:
ARP Pkt Discard For Other:
4.6.2 Clearing the Statistics on ARP Packets
Context
Statistics cannot be restored after you clear them. So, confirm the action before you use the
command.
4-18
500
suppress-rate(pps)(rate=0 means function disabled)
200
300
0
1000
500
Run the display arp packet statistics [ slot slot-id ] command to view the statistics on
ARP packets.
sum
sum
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
25959
3
sum 0
sum 0
sum 23
Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
Issue 01 (2009-07-28)